17422 products in Others

- Operated by a 12V battery and momentary switch - Voltage: 12 VDC - Current: 8-25 amps - Run Time: 2 minutes - Warranty: 6 month warranty

- This spray gun is supplied with a 600cc gravity feed cup, with 1.4 1.7 2.0mm real stainless steel nozzle and needle. - The hvlp spray gun hood is made of brass, wear-resistant and corrosion-resistant, 15 holes design, uniform atomization, excellent effect. 1/4 "NPT inlet and quick adapter of the same specification. - The high volume and low pressure atomization technology is adopted to have a fine atomizing effect, thus achieving an optimal combination of quality and effciency; 10%-30% paint can be saved as compared with common spray gun. - Built-in 3 ergonomic anodized knobs are perfect for precise control, will allow you to use the controls to create the perfect spray pattern, and enable you to achieve optimum performance of your spray gun for perfectly finished results. These controls are: the fluid adjustment, the fan control, and the air micrometer. - Endozer spray paint gun can be used for various purposes such as furniture repair, mural painting, car painting, painting, arts and crafts, paint coating of industrial products, spray paint of factories, and model making. HVLP air spray gun that is easy to use even for beginners

Color: Blue-1.4/1.7/2.0(plastic cup)

- Gentle: ZEISS lens wipes are pre-moistened and designed to remove smudges and dirt for a through gentle cleaning. - Safe: Use ZEISS wipes on a variety of glasses types, including prescription lenses or those with anti-reflective coatings. - Effective: Clean sunglasses and prescription eyeglasses for a spotless finish without streaks or residue. - Non-abrasive: Our ultra-soft eyeglass wipes are non-abrasive and designed to be tough on imperfections, not lenses. - Convenient: Individually wrapped for on-the-go use, perfect to keep in your car, backpack, purse or wallet.

- ①【Print Faster】 -SUNLU high-speed 3D printer PLA filament, designed to turbocharge your printing from slow to swift. Experience a colossal 500% increase in flowability, ensuring smooth printing even at speeds exceeding 250mm/s, without clogs or filament shortages. Bring your ideas to life with high-speed printing, on average, save 70% printing time. - ②【Efficient Cooling】 -High speed PLA filament boasts a 180% boost in heat dissipation, enabling quicker cooling and curing than regular PLA filament under the same conditions. This prevents 3d filament material buildup during fast prints, improving printing speed while also ensuring accuracy and mechanical performance. - ③【High Speed PLA Printing Tips】 -The average printing temp of SUNLU High Speed PLA filament is lower than regular PLA filament, saving time and energy consumption. As HS PLA Filament is temperature-sensitive, please set slicing parameters according to recommended print speed and temp matching based on your 3D printer. If stringing occurs, please reduce print temp appropriately. - ④【Clog-Free and Bubble-Free】 -SUNLU 3d printer PLA filament consistent diameter tolerance 1.75mm ±0.02mm, ensuring tangle-free and knot-free. Rigorous 24-hour pre-packaging drying, plus vacuum-sealing, guarantees moisture-free printing, eliminating clogs and bubbles. Increase your printing success rate. - ⑤【After Sales Guarantee】 -SUNLU, founded in 2013, is a high-tech company dedicated to research and development, production and sales of 3D printing filaments, 3D printers and various 3D printing materials such as PLA, PETG, 3d resin etc. We are committed to making ongoing and exceptional contributions to the 3D printing industry.

- BEAUTIFUL MATTE FINISH: ELEGOO MATTE PLA produce a beautiful matte, low gloss and smooth finish, resulting in a printed object with nearly invisible layer lines - TOP-NOTCH ACCURACY & CONSISTENT: ELEGOO use advanced measurement procedures during manufacturing to guarantee all filament is 1.75 mm diameter, accuracy +/- 0.05 mm, ensuring consistency and precision in every print - PERFECT WINDING FOR BETTER RESULT: Each spool of filament is neatly wound, which prevents tangles and feeding issues, giving out perfect printing results - NO CLOGGING & NO BUBBLE: ELEGOO PLA Filament is manufactured in dry and dust-free environment and pack with vacuumed sealed package, away from any dampness or air, no clogging and bubbling problems - FIT FOR MOST 3D PRINTERS: Universal compatibility with common 1.75 mm FDM 3D printers, such as Neptune series, Ender series, Kobra series, A1 series and more. If you use enclosed printer, please keep the door open when printing ELEGOO MATTE PLA

Color: Black & Slate Gray

- BEAUTIFUL MATTE FINISH: ELEGOO MATTE PLA produce a beautiful matte, low gloss and smooth finish, resulting in a printed object with nearly invisible layer lines - TOP-NOTCH ACCURACY & CONSISTENT: ELEGOO use advanced measurement procedures during manufacturing to guarantee all filament is 1.75 mm diameter, accuracy +/- 0.15 mm, ensuring consistency and precision in every print - PERFECT WINDING FOR BETTER RESULT: Each spool of filament is neatly wound, which prevents tangles and feeding issues, giving out perfect printing results - NO CLOGGING & NO BUBBLE: ELEGOO PLA Filament is manufactured in dry and dust-free environment and pack with vacuumed sealed package, away from any dampness or air, no clogging and bubbling problems - FIT FOR MOST 3D PRINTERS: Universal compatibility with common 1.75 mm FDM 3D printers, such as Neptune series, Ender series, Kobra series, A1 series and more. If you use enclosed printer, please keep the door open when printing ELEGOO MATTE PLA

Color: Mint Green

- 【SUNLU PLA PLUS 3D Filament】- PLA PLUS filament is 3 times stronger than PLA Filament, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion. - 【Neatly Wound 3D Filament Spool】- SUNLU R&D team has mastered advanced technology and produced Neatly Wound PLA Plus Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency. - 【PLA Plus Filament 1.75mm】- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers. - 【Filament Spool Diameter】- Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers. - 【Recommend Settings】- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F). - 【Strong compatibility】- SUNLU 3D Filament is not only applicable to all SUNLU 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc. - 【SUNLU Main 3D Products】SUNLU offers a wide range of high-quality 3D printing products, including 3D printer filament, filament dryer, FDM 3D printer, 3D pen, 3D pen filament, 3D printer resin, LCD 3D printer, resin curing box, and other accessories, providing you with everything you need for a successful 3D printing experience.

Color: 4kg Pla Plus Red+klein Blue+sunny Orange+yellow    Size: 4 kg

- 【SUNLU PLA PLUS 3D Filament】- PLA PLUS filament is 3 times stronger than PLA Filament, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion. - 【Neatly Wound 3D Filament Spool】- SUNLU R&D team has mastered advanced technology and produced Neatly Wound PLA Plus Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency. - 【PLA Plus Filament 1.75mm】- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers. - 【Filament Spool Diameter】- Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers. - 【Recommend Settings】- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F). - 【Strong compatibility】- SUNLU 3D Filament is not only applicable to all SUNLU 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc. - 【SUNLU Main 3D Products】SUNLU offers a wide range of high-quality 3D printing products, including 3D printer filament, filament dryer, FDM 3D printer, 3D pen, 3D pen filament, 3D printer resin, LCD 3D printer, resin curing box, and other accessories, providing you with everything you need for a successful 3D printing experience.

Color: 4kg Pla Plus Black+white+grey+transparent    Size: 4KG

No description available.

Color: 4kg Pla Fluorescent Purple+green+yellow+orange    Size: 4 kg

- 【SUNLU PLA PLUS 3D Filament】- PLA PLUS filament is 3 times stronger than PLA Filament, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion. - 【Neatly Wound 3D Filament Spool】- SUNLU R&D team has mastered advanced technology and produced Neatly Wound PLA Plus Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency. - 【PLA Plus Filament 1.75mm】- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers. - 【Filament Spool Diameter】- Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers. - 【Recommend Settings】- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F). - 【Strong compatibility】- SUNLU 3D Filament is not only applicable to all SUNLU 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc. - 【SUNLU Main 3D Products】SUNLU offers a wide range of high-quality 3D printing products, including 3D printer filament, filament dryer, FDM 3D printer, 3D pen, 3D pen filament, 3D printer resin, LCD 3D printer, resin curing box, and other accessories, providing you with everything you need for a successful 3D printing experience.

Color: 4kg Pla Plus Black+roasted Chestnut+midnight+coffee Brown    Size: 4KG

- ① 【Super Neat Filament Spool】SUNLU 3D printer filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, no clogs, making filament easier to use. - ②【SUNLU PLA 3D Printer Filament】PLA filament is the most basic, the most used filament, no clogs, no bubbles, no tangle, SUNLU PLA filament has good layer adhesion, very easy to use. - ③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers. - ④【Filament Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers. - ⑤【Recommend Settings】We recommend printing the PLA filament at nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s.

Color: 1kg Pla Cyan    Size: 1 kg

- 【SUNLU PLA PLUS 3D Filament】- PLA PLUS filament is 3 times stronger than PLA Filament, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion. - 【Neatly Wound 3D Filament Spool】- SUNLU R&D team has mastered advanced technology and produced Neatly Wound PLA Plus Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency. - 【PLA Plus Filament 1.75mm】- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers. - 【Filament Spool Diameter】- Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers. - 【Recommend Settings】- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F). - 【Strong compatibility】- SUNLU 3D Filament is not only applicable to all SUNLU 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc. - 【SUNLU Main 3D Products】SUNLU offers a wide range of high-quality 3D printing products, including 3D printer filament, filament dryer, FDM 3D printer, 3D pen, 3D pen filament, 3D printer resin, LCD 3D printer, resin curing box, and other accessories, providing you with everything you need for a successful 3D printing experience.

Color: 1000g-pla Plus Orange    Size: 1 kg