13516 products in Others

- Uses: For drilling holes in leather, rubber, vinyl, paper, gypsum board - Size: 7.0mm - Shaft diameter: 0.25 inch (6.35 mm) hex shaft - Compatible models: Charging drill and impact driver - Material: SK-4

Size: 07mm

- Size: 175 x 70 x 38 mm - Weight:155g - Automatic winding length: 8 m / 26.2 ft - Thread Length: Diameter 0.02 inches × 49.2 ft (0.6 mm × 15 m) - Materials: Body: ABS resin, polyacetal resin, silicone rubber, rubber, stainless steel, sponge: cellulose, calco: ABS resin, rubber, needle: spring steel, thread: nylon

Size: Jr.Plus    Style: Automatic movement with holder    Color: Black

- [Dye Q Series] The nano-unit particles adhere to the surface of the material, making it look as if it is dyed Its adhesive strength is such that, even when pulled or twisted, it does not crack or peel off, allowing you to change the image without altering the texture of the material Great for changing the color of leather products, repairing old and faded items... Quick drying and good workability, and can be used with a wide range of materials and applications - Features: Achieves a finished look as if leather, fabric, wood, plastic, and metal have been dyed Easy to clean with just spray Utilizing nanotechnology, this dye-type paint features nano-sized particles that penetrate and adhere tightly to the material's interior.' When using, ensure good ventilation and use protective equipment to avoid inhaling mist or gas - Applicable materials: Please see the material adaptation chart for Somé Q - 【Simple Description】 It features a finish that looks like dyeing just by spraying it on metal, leather, fabric, wood, and plastic Utilizing nanotechnology, this dye-type paint features nano-sized particles that penetrate and adhere tightly to the material's interior.' Can also be used to change the color of leather and repair faded items Fast drying for good workability, and can be used with a wide range of materials and applications - 【注意事項】 ・Shake well up and down for about 1 minute before use, and occasionally shake well during use Please do not apply thick coatings When using, perform a test application on an inconspicuous area to check for any unusual effects on the material or adhesion ・Do not use when the temperature is below 5°C or humidity is above 70% Spray thickly at once, and ensure not to keep more than 15 cm away from the painted surface ・Materials that are weak to solvents are not suitable When handling, please read the precautions and other notes listed on the product carefully before use

Color: モスグリーン    Pattern Name: 単品

No description available.

Size: 3L

- [Drying/Recoating Time] [68°F (20°C)] Drying Time: About 1 hour, Recoating Time: About 2 hours or more [Winter] Drying Time: About 2 hours, Recoating Time: About 4 hours or more [Coverage Area (1 coat)] 2L: Square Meter: About 10-25 m², Tatami Coverage: About 12 sheets 4L: Square Meter: About 20-50 m², Tatami Coverage: About 24 sheets 7L: Square Meter: About 35-85 m², Tatami Coverage: About 42 sheets 14L: Square Meter: About 70-170 m², Tatami Coverage: About 84 sheets - 【特徴】 ■[Enhanced adhesion! The positive ions of cations and the base material, and the negative ions of old paint films are electrically attracted to each other, enhancing adhesion ■[Adhesion & durability are improved! Since it is a reaction-hardening type with silicone content, it further improves adhesion and durability ■[Easy-to-handle paint] Since it is water-based, it has a weak odor and is easy to handle - 【Applications】 ■[Primer for building materials] Blocks / Mortar / Concrete / Siding (excluding ceramic type) etc. ■[Various primers] Indoor vinyl wall coverings / Gypsum board / Calcium silicate board ■[Improves adhesion] When repainting exterior walls / Old paint film 【Not to be used for】■Do not use for purposes other than those indicated ■ Cannot be used on smooth surfaces, specially processed materials, silicone resin, fluorine resin, tile, ceramic, natural stone, special waterproof treated materials, etc ■ Areas constantly exposed to water: Pool / Bathtub / Bathroom floor / Pond - 【注意事項】 ■For cement tiles, slate tiles, etc., please use our "oil-based sealer" When using, please pour a small amount into a roller tray (metal containers are not allowed as they rust) ■Please do not dilute this product ■ Do not mix. Absolutely do not mix with other paints Also, avoid using the same brushes, rollers, or other tools with other paints as it may cause the paint to solidify ■The color changes when it dries It is a milky white liquid, but it becomes almost transparent when dry ■ Strictly avoid moisture until dry. Ensure that bathrooms, toilets, and washrooms are not exposed to water or steam for at least one day after painting ■ About drying time: The drying time and the area to be painted may vary slightly depending on weather conditions, the material being painted, the shape, and the painting method - 【Cleaning tools】 Water (do not dilute it), use as is )

Size: 14 L

- Tesa Tape Fiberglass Tape (for Board Joints) - ● Extremely strong glass fiber base material ● Good workability due to the presence of adhesive - - For preventing cracks in gypsum board joints and repairing scratches or small holes - Color: White; Length: 147.6 ft (45 m); Thickness: 0.225 mm; Width: 2.0 in (50 mm); Weight: 5.7 oz (163 g) - ● Adhesive Strength: 0.5 N/cm ● Tensile Strength: 49 N/cm ● Elongation: 2% ● Base Material: Glass Fiber ● Adhesive: Acrylic Type ● Thickness: 0.225 mm (0.009 inches) - Base material: Glass fiber; Adhesive: Acrylic type

- [Drying/Recoat Time] [68°F (20°C)] Drying Time: About 1 hour, Recoat Time: About 2 hours or more [Winter] Drying Time: About 2 hours, Recoat Time: About 4 hours or more [Coverage Area (1 coat)] 2L: Square Meter: About 10-25 m², Tatami Coverage: About 12 sheets 4L: Square Meter: About 20-50 m², Tatami Coverage: About 24 sheets 7L: Square Meter: About 35-85 m², Tatami Coverage: About 42 sheets 14L: Square Meter: About 70-170 m², Tatami Coverage: About 84 sheets - 【特徴】 ■[Enhanced adhesion! The positive ions of the cation and the base, and the negative ions of the old paint film are electrically attracted to each other, increasing adhesion ■[Adhesion & durability are improved! Since it is a reaction-hardening type with silicone added, it further improves adhesion and durability ■[Easy-to-handle paint] Since it is water-based, it has a weak odor and is easy to handle - 【Applications】 ■[Primer for building materials] Blocks / Mortar / Concrete / Siding (excluding ceramic type) ■[Various primers] Interior vinyl wallpaper / Gypsum board / Calcium silicate board ■[Improves adhesion] When repainting exterior walls / Old paint film 【Not to be used for】 ■Do not use for purposes other than those indicated Cannot be used on smooth surfaces or specially treated materials such as silicone resin, fluororesin, tiles, ceramics, natural stone, or specially waterproofed materials ■ Areas constantly exposed to water: Pool / Bathtub / Bathroom floor / Pond - 【注意事項】 ■For cement tiles, slate tiles, etc., please use our "oil-based sealer" When using, please pour a small amount into a roller tray (metal containers are not allowed as they can rust) ■Please do not dilute this product ■ Do not mix. Absolutely do not mix with other paints Also, avoid using the same brushes, rollers, or other tools with other paints as it may cause the paint to solidify ■The color changes when it dries It is a milky white liquid, but it becomes almost transparent when dry ■ Strictly avoid moisture until dry: Ensure that bathrooms, toilets, and washrooms are not exposed to water or steam for at least one day after painting ■ About drying time: The drying time and the area to be painted may vary slightly depending on weather conditions, the material being painted, the shape, and the painting method - 【Cleaning tools】 Water (do not dilute it), use as is )

Size: 4L

- Shelf Life: None, Production Date Indicated: Yes - Content: 1 kg (2.2 lbs) - Specifications: Comes in a poly can, environmentally friendly product, water-based - Color: White - Material: vinyl acetate - After curing, it can also be painted Comes in an easy-to-handle and air-tight plastic pail

- The inner flame type Eco Burner with flame coming out inside suppresses unnecessary flames that spill from the bottom of the pot Superior heating efficiency, saving 16% energy compared to regular burners - The top is coated with glossy silver fluorocarbon, giving it an advanced, sharp, and luxurious design - The glossy silver fluorine coating provides high durability and long-lasting effectiveness Stain resistant and easy to clean - This product can use a 10-gou clay pot (diameter about 30 cm). (Previous models could only use up to a 9-gou clay pot) - Product size: W 13.5 x D 11.1 x H 3.5 inches (W 344 x D 282 x H 89 mm). Product weight: Approx. 3.3 lbs (1.5 kg). Color: Silver & Matte Black. Materials: Body: Steel plate (static electricity coating), Top plate: Fluorine pre-coat steel plate, Trivet: Heat-resistant aluminum die-cast, Burner: Heat-resistant aluminum + Alstar steel plate, Ignition knob: ABS resin. Maximum heating volume: 2.9 kW (2,500 kcal/h). Continuous burning time: Approx. 72 minutes (actual measurement of time taken until gas canister is used up when continuously burning on high flame at a temperature of 68.0 to 77.0°F (20 to 25°C)). Ignition method: Piezoelectric ignition method. Safety device: Pressure sensing safety device. Canister Attachment Method: Magnet. Gas used: Iwatani gas canisters. Country of origin: Japan - The cassette gas is sold separately

Color: silver & matte black   

- 【Use】Minimalistic design motorcycle seat bag that does not distort the silhouette - Feature 1: Includes an easy ring belt that can be secured to your bike easily, reliably, and neatly - 【Specification 2】Capacity: 4L, Maximum Load Weight: 5kg - Specifications: Height: 110 mm, Width: 250 mm, Depth: 285 mm - 【Product Composition】Main unit x1 Easy Ring Belt N20A x1 Rain cover x1

Color: red (carbon tone)

- Sweet walnut treats coated with sugar and maple syrup 🧡Sweet flavor Recommended for those who love sweets Maple coated walnuts - Inert gas-filled packaging, aluminum-coated bag, and zippered bag - 🧡[Name] Nut and Seed Product 🧡[Ingredients] Walnuts (USA), sugar, maple syrup, maltose, soy sauce, starch hydrolyzate, salt, ginger, (contains wheat and walnuts) - Content: 250 g (8.8 oz) - ❤️ [Shelf Life] 150 days (The shelf life is for unopened products, so please consume as soon as possible after opening.) ) - 🧡[Storage Method] Please store in a cool, dark place, avoiding direct sunlight and high temperatures and humidity - 🧡[Manufacturer] Tomoguchi Inc., 802-0823, Kitakyushu City, Ogura-Minami Ward, Maigaoka 1-2-7, Fukuoka Prefecture - 🧡[Allergy] Specific raw materials: wheat, walnut - 🧡[Nutritional Information (Per 100 g)] Energy: 681 kcal, Protein: 11.4 g, Fats: 60.8 g, Carbohydrates: 24.1 g, Salt Equivalent: 0.4 g - 🧡[Note] The package may be changed without notice This product uses raw walnuts

Color: Maple    Size: 320g

- Emergency Food Variation Set that Stores Space: 1 set for 1 person. Comes in a compact box, so it can be stored in small spaces and is recommended for multiple family stocks. Box size: Long side: 10.6 inches (27 cm), Short side: 6.7 inches (17 cm), Height: 6.3 inches ( - Set Contents: Onishi Hidamari Pan: Plain x 1, Maple x 1, Chocolate x 1, Portable Rice Onigiri: Salmon x 1, Five Kokawa x 1, Kombuu x 1, Alpha Rice x 1, Wakame x 1, Dry Curry x 1 (Total of 9 bags) - (Complete amount) Bishishi Hidamari Bread Variety: 2.5 oz (70 g) Portable Rice Grit: Salmon 3.9 oz (109 g) Give-To-Go Owa 3.9 oz (104 g) Kombu 3.9 oz (109 g) Alpha Rice Variety: 9.2 oz (260 g) *Water is required to eat alpha rice. Spoons come in a bag so no utensils are required - Usage of 28 Allergens (Specified Ingredients, etc.): Bisai Hidamari Bread Variety: Wheat, Egg, Dairy Ingredients, Portable Rice Salmon: Salmon, Portable Rice Onigiri: Wheat, Soy