18319 products in Others

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: グレー    Size: １／１２Ｌ

Asahipen Oil-based Heavy Duty Paint for Iron Parts, 23.7 fl oz (0.7 L), Matte Black, For Iron, Metal, Rust Resistant, Non-Hazardous, Made in Japan

Color: ツヤ消し黒    Size: ０．７Ｌ

Can be painted directly over rust, a rust-preventive paint for iron parts Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance. No need for rust removal or rust-preventive paint, significantly reducing painting labor Uses: For doors, fences, shutters, pipes, machinery, agricultural equipment, and other indoor and outdoor iron parts and iron products. For galvalume steel siding, corrugated tin, aluminum building materials, and stainless steel products. Note: Rust that comes off in chunks needs to be removed. Thinning Method: If the paint has a high viscosity and is difficult to apply, please dilute it with a paint thinner solution (10% or less).

Color: chocolate color    Size: １／１２Ｌ

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: ツヤ消しこげ茶    Size: 1/12L

Makita 100 A-56649 PVC Cutting Chamfered Diamond Wheel Product Number: A-56649

Color: Silver    Size: 外径100mm

The angle can be adjusted arbitrarily. It can be fixed at the angle set with the stop screws

Size: 15cm

The angle can be adjusted arbitrarily. It can be fixed at the angle set with the stop screws

Size: 25cm

- Weight: 605g - Body: Die-cast aluminum - Compatible Caulking Agent: 11.2 fl oz (330 - Total length x height x shaft diameter: 14.6 x 8.7 x 2.3 inches (370 x 220 - Grip Trigger: Engineer Plastic

Asahipen Oil-based Heavy Duty Paint for Iron Parts, 23.7 fl oz (0.7 L), Sky Blue, For Iron, Metal, Rust Resistant, Non-Hazardous, Made in Japan

Color: blue, (sky)    Size: 0.7L

Ideal for removing rust from iron, non-ferrous metals, paint removal, etc. [Use] Rust remover, paint removal, ground polishing, scale removal after welding, deburring. Features: Hard steel wire with brass plating and wire material, so it is a safety type with little rust and breakage. [Precautions] Please use with the maximum rotational speed. Please wear protective glasses.

Somay-Q Series achieves a finish that looks dyed by adhering nano-sized particles to the surface of the material! This strong adhesion means that even when pulled or twisted, it won't crack or peel, allowing you to change the look without altering the texture of the material.Perfect for changing the color of leather goods or restoring faded items. It dries quickly and is easy to work with, making it suitable for a wide range of materials and applications. Features: The finish resembles the appearance achieved through dyeing on leather, cloth, wood, plastic, and even metal.Simply spray for a beautiful finish.By using nanotechnology to create a dye-like paint, nano-sized particles permeate and firmly adhere to the inner structure of the material.Please ensure proper ventilation when using, and use protective gear to avoid inhaling mist, gas, or similar substances. Applicable Materials: Please refer to the Somay-Q’s material compatibility chart (English language not guaranteed). Brief Description: Achieves a dye-like finish by simply spraying on metal, leather, fabric, wood, and plastic. Utilizes nanotechnology to create a dye-like paint where nano-sized particles penetrate and adhere to the interior of the material. Ideal for changing the color of leather goods or restoring faded items. Dries quickly and is easy to work with, suitable for a wide range of materials and applications. Note: You cannot use it on some materials, such as reptile leather, enamel, silicone and polyethylene (PE).For more details, please refer to the material compatibility table (English language not guaranteed).-Cannot be used on materials weak to solvents, materials from which oil cannot be completely removed, or materials with water-repellent or other coatings on the surface.Before use, test on an inconspicuous area to ensure there are no unusual effects on the material or issues with adhesion.Applying thick coats on highly-absorbent fabrics or materials with long fibers like suede may result in a rough texture.When spraying bright colors on dark-colored materials, please make sure to use the Somay-Q Base Coat as a primer.Even with the Somay-Q Base Coat, it can be difficult for colors to appear as desired on highly-absorbent materials such as fabric.Test on an inconspicuous area before use.Avoid use when the temperature is below 41°F (5°C) as poor drying may occur.Avoid use when humidity is above 70% to prevent whitening phenomenon (surface film turning white and cloudy).Use in a windless outdoor area and take sufficient precautions to prevent the paint from soiling the surroundings.Ensure good ventilation during painting and drying, and wear masks and gloves to avoid inhaling paint mist or skin contact.

Color: sun yellow    Pattern Name: Single Item

Somay-Q Series achieves a finish that looks dyed by adhering nano-sized particles to the surface of the material! This strong adhesion means that even when pulled or twisted, it won't crack or peel, allowing you to change the look without altering the texture of the material.Perfect for changing the color of leather goods or restoring faded items... It dries quickly and is easy to work with, suitable for a wide range of materials and applications. Features: The finish resembles the appearance achieved through dyeing on leather, cloth, wood, plastic, and even metal.Simply spray for a beautiful finish.By using nanotechnology to create a dye-like paint, nano-sized particles permeate and firmly adhere to the inner structure of the material.Please ensure proper ventilation when using, and use protective gear to avoid inhaling mist, gas, or similar substances. Applicable Materials: Please refer to the Somay-Q material compatibility chart. Brief Description: Achieves a dyed-like finish by simply spraying on metal, leather, fabric, wood, and plastic. By using nanotechnology to create a dye-like paint, nano-sized particles permeate and firmly adhere to the inner structure of the material. Ideal for changing the color of leather goods or restoring faded items. Dries quickly and is easy to work with, suitable for a wide range of materials and applications. Note: You cannot use it on some materials, such as reptile leather, enamel, silicone and polyethylene (PE).For more details, please refer to the material compatibility table (English language not guaranteed).- Do not use on materials that are sensitive to solvents, materials from which oil cannot be completely removed, or surfaces with water-repellent coatings.- Before use, test on an inconspicuous area to ensure there are no unusual effects on the material or issues with adhesion.- Applying thick coats on highly absorbent fabrics or materials with long fibers like suede may cause stiffness.- When spraying bright colors on dark materials, please make sure to use \"Somay-Q Base Coat\" as a primer.Even with the Somay-Q Base Coat, it can be difficult for colors to appear as desired on highly absorbent materials such as fabric.Test on an inconspicuous area before use.- Avoid use when the temperature is low (below 41°F/5°C) as this can lead to poor drying.- Avoid use when humidity is 70% or higher as this can cause whitening (surface film turning white and cloudy).- Use in a windless outdoor area and take sufficient precautions to prevent the paint from soiling the surroundings.- Ensure good ventilation during painting and drying, and wear masks and gloves to avoid inhaling paint mist or skin contact.

Color: モスグリーン    Pattern Name: 単品