1403 products in Electronics

- 【Upgraded Quick Setup Turtle Base】 Featured with a revolutionary spring ring locking mechanism, our light stand base enables the chassis legs to pop up by gravity in seconds. All you need to do is to pull the locking sleeve on the top of the base. The three legged structure provides stability to hold your photography equipment - 【Durable Reinforced Rod】 Made of industry grade stainless steel, the central pole of this photography C stand is thickened and forged with large diameters of 1.2in (30mm), 1.4in (35mm), and 1.6in (40mm), delivering a reliable central bearing with longer service time and a maximum load capacity of 44lb/20kg - 【Versatile Arm with High Load Capacity】 The 4.2ft (127cm) holding arm boasts a maximum load capacity of 17.6lb (8kg), finished with a 1/4" stud on one end and a 3/8" stud on the other end for attaching a strobe light, CB60 RGB 70W/RGB1200 LED video light, reflector, umbrella, SF30120Q/SF-RPBO26 softbox and other photographic equipment. You can also install your light stand attachment with a 5/8" mount onto either end of this grip arm - 【Adjustable Height】Our C stand can be adjusted in height from 5ft (153cm) to 10.5ft (320cm), accommodating different lighting needs. The center stand is equipped with a built in buffer spring to reduce the impact of sudden drops of the installed equipment and protect the equipment when adjusting the height - 【Flexible Use】Two premium and standard grip heads are crafted with 4 different mounting channels of 5/8", 1/2", 3/8", and 1/4", accepting any compatible accessories for your enhanced photography solutions. These mounting adapters enable height and angle adjustment (360° rotatable) for enhanced flexibility, with an excellent locking system for stability and safety

Model: SC320Q

- 【Heavy Duty Air Cushion Spring Loaded Light Stand】 Made of 100% robust stainless steel, this C stand can mount strobes, monolights, reflectors, softboxes, umbrellas, and other photography gear with exceptional stability. Internal air cushion and spring design prevent sudden equipment falls, reducing damage risks - 【Adjustable Height & Extension Arm】 The center column with 3 sections is adjustable from 5.2ft to 10.8ft (158cm to 330cm) with a foam grip to prevent slipping in transit. The 4.2ft (128cm) extension arm with a 1/4” and 3/8” mounting screw on both ends is compatible with most equipment - 【Metal Grip Heads】 The grip heads can lock the extension arm with a firm grip and allow flexible angle adjustment. Four holes in each grip head can fasten rods, arms, and umbrella shafts in different diameters - 【Foldable Turtle Base】 Turtle base with nonslip pads allows sandbag placement for adding stability without scratching the floor (sandbags not included). Legs and can be folded flat for space saving storage - 【Package Contents】 1 x Sliver C Stand, 1 x Turtle Base, 1 x Extension Arm, 2 x Grip Head

Model: SC320AC

- 【Versatile Heavy Duty Video Tripod】 TP74 tripod stabilizes a camera or camcorder to take photos and videos of sports, weddings, landscapes, and products. Double tandem aluminum alloy legs provide reliable stability with a max load capacity of 17.6lb/8kg. The mid level spreader and nonslip rubber feet for further stability - 【Premium Fluid Drag Pan Head】 TP74 Tripod features a fluid drag pan head with a smooth friction damping and balancing system. Supports 360° rotation and -75°/+90° tilt movement. The ø3" (75mm) bowl base with 360° scale for panoramic sharp images with fluidity. A handy bubble level helps to keep the level straight all the time. The telescopic handle is easy to use and store - 【Quick & Easy Modes Switching】 The fluid head has two QR modes, compatible with DJI RS2 RS3 RS3 PRO gimbal and compatible with Manfrotto 501PL 504PL quick release plates respectively. The quick release plate allows you to lock it in 1s and switch between tripod and gimbal shooting - 【Height Adjustment from 35" to 74" 】 3 section telescopic legs and flip locks enable this shooting tripod to extend from 34" to 74" (86cm to 187cm). The photography tripod can be folded to 36"/91cm and fit in the carrying bag for easy storage and transportation. Adjust the tension of the flip locks with the L shaped hex keys - 【Universal Mounting Threads】 The 1/4" & 3/8" screws on the top of the fluid head make it compatible with Sony Canon Nikon and other DSLR cameras, mirrorless cameras, camcorders, and telescopes. The 1/4" threaded hole for external devices such as magic arms, monitors, cell phones, microphones, video lights, etc.

Style: TP74

- Compatibility : This kit includes a top handle 3765 and a monitor mount 2905B. The monitor mount 2905B is designed to support 5” and 7” camera monitors via cold shoe on top of camera cages or handles. The top handle with locating holes for ARRI 3765 is designed to facilitate low-angle shot and reduce burdens on arms - Tension Adjustable: The monitor mount offers 180° tilt & 360° swivel. Different with the old version using allen wrench, the tilt tension of this upgraded monitor mount is quickly adjusted via a thumbscrew. The swivel tension is adjusted by provided allen wrench - Anti-Twist Design: The camera monitor holder features bulid-in bouncy locating pins on the top to futher secure Ninja V/ V+, and silicone pad to prevent the monitor from scratching and twisting - Multiple Mounting Points: The top handle features 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories. Additionally, it has an abundance of 1/4"-20 and 3/8"-16 mounting points for other accessories. An allen wrench helps tighten the locking screw, making it easy to assemble and disassemble - Note: Different tilt angle has different load capcaity, 90° load capacity＜4.2kg; 45° tilt load capacity＜2.5kg, 30° tilt load capacity＜2.3kg. For the safety, please do use the Allen Wrench to re-tighten the 1/4'' knurled screw for further security

- Durable Weatherproof Construction:Crafted from high-density 1000D Oxford nylon with waterproof coating and sealed seams. Protects gear from rain, abrasion, and outdoor wear. - Enhanced Impact Protection:3cm thick foam-padded interior cushions C-stands, tripods (up to 46"), and mic stands against drops and shocks. Reinforced quick-release buckles secure heavy loads. - Stable Heavy-Duty Design:Anti-slip rubber base and double-stitched handles tested to support 50 lbs. External pocket organizes memory cards, chargers, and tools. - Spacious & Organized Storage:Fits 2 C-stands, 6 mic stands, or telescopic gear. Includes a zippered front pocket and hook-and-loop slots for accessories. - Portable for Multi-Scenarios:Adjustable shoulder strap and foldable design (collapses to 1/3 size) ideal for photographers, anglers, and outdoor crews.

- Universal Compatibility: The TV wall mount fits most 32-70 inch flat or curved TVs up to 132 lbs, supports VESA 200x75mm to 400x400mm. Also, this TV mount comes with a set of soundbar bracket for you to use, you don't need to buy soundbar bracket again! Bring you a better movie watching effect - Upgrade Viewing Experience: This full motion TV mount tilts TV up 5° and down 15° to reduce glare, the TV bracket features a +/-64 ° swivel range allows TV to move flexibly. Post-installation leveling allows you to fine-tune your TV's position by +/-3° after mounting, with this full motion TV wall mount, you can have a more immersive viewing experience - Expandable Design: The TV wall mount is built with dual articulating 6 arms support for expandable function. The full-motion TV mount extends 16.5" for viewing, helping to reduce neck and eye strain, so you can enjoy your favorite shows and movies in maximum comfort. It also retracts to 2.67" from the wall for a space-saving, low-profile look - Strong and Secure: This TV wall mount extension bracket features sturdy, heavy-duty steel construction, a one-piece molded wall plate, and two larger, thicker TV wall mount to hold your TV securely in place. The articulated double arm design provides greater strength and stability, ensuring that your TV won't fall when hung on the bracket - Easy Installation: Designed with convenience in mind, the TV mount comes pre-assembled, allowing for easy installation right out of the box. The TV mount can be installed on 8"/12"/16" wood studs, concrete or brick walls. PLEASE NOTE: This TV mounting bracket is NOT for drywall alone installation

- 【Heavy Duty Yet Lightweight Camera Tripod】 The aluminum alloy tri pod features a 2-1-1 structure and multi tube design, supporting DSLR cameras up to 13.2 lbs (6 kg) while reducing its weight to 5.95 lbs (2.7 kg), with a 32.3" (82 cm) folded length for indoors and outdoors like products, sports, weddings and landscapes. Adjust from 30.3" (77 cm), 48" (122 cm) to 65" (165cm) with a twist of three leg lock knobs. The mid spread lever allows for quick release and easy setup - 【Premium Fluid Drag Pan Head】 The video tripod features a fluid drag pan head, offers smooth friction damping, and supports 360° rotation with a tilt range of -75° to +90°, with a detachable handle for both left and right handed use. Its 75mm bowl base comes with a 360° scale for capturing sharp panoramic images, and includes a leveling handle and a built in bubble level for rapid leveling. The fluid head is also removable for other tripods with a 75mm base diameter - 【Universal Mounting Threads】 The 1/4" & 3/8" screws on the top of the fluid head make this tall professional vlogging tripod stand compatible with Sony Canon Nikon and other DSLR cameras, mirrorless cameras, camcorders, and telescopes. The extra 1/4" threaded hole on the side is for external photography gear or videography accessories such as magic arms, monitors, cell phone holders, microphones, video lights, etc. - 【Quick & Easy Modes Switching】 The fluid head has two QR modes, compatible with Manfrotto 501PL 504PL quick release plates respectively. The quick release plate allows you to lock it in 1s and switch between tripod and gimbal shooting - 【Interchangeable Non Slip Feet】 Non slip rubber feet grip stably on indoor smooth surfaces like floors or rocks, while spike feet are designed for soft outdoor surfaces such as grass, sand, or dirt, to remain stable, and your camera or video equipment stays safe while shooting. The interchangeable design is flexible and versatile for different shooting scenarios as content creator essential and influencer must have

Style: TP73

- 33MP1 full-frame Exmor R back-illuminated CMOS sensor - 8x more powerful2, next generation BIONZ XR image processing engine - Up to 4K 60p11 10-bit 4:2:2 w/ full pixel readout in all rec. formats - Real-time Eye-AF for humans, animals, birds for photo and movie - Advanced movie features; Focus Map16, Breathing Comp14., S-Cinetone, S-log3, HLGAF Assist17

Style: w/ 2026 28-70mm lens

- We recently increased high-speed data allotments on every plan (but kept the same low pricing)! You may see a 15GB sticker on the front of your 17GB SIM Kit, rest assured your plan will have all 17GB of data loaded each month. - WHAT YOU GET: Three (3) months of unlimited talk and text + 17GB of 5G-4G LTE data each month delivered on the nation's largest 5G network. - OH, YOU GET THIS TOO: 5G for Free + free mobile hotspot + Wi-Fi calling and text + free international calls to Mexico and Canada - HOW YOU GET IT: The SIM Kit comes with a 3-in-1 SIM card that includes standard/micro/nano sizes, insert the SIM into your device, and activate on the Mint Mobile website or app. You can activate service on your own unlocked device with our Bring Your Own Phone (BYOP) program. Check your coverage and phone compatibility on the Mint Mobile website. - WHO SHOULD GET IT: Anyone who hates their phone bill - WHY YOU SHOULD GET IT: Mint Mobile took what’s wrong with wireless and made it right. We re-imagined the wireless shopping experience and made it easy and online. - LEGAL STUFF: Capable and compatible device required. Coverage not available in all areas. New activations only. Upfront payment of 60 USD for 3-month plan (20/mo. equiv.) req’d; while supplies last. Intro rate for first 3 months; then full-price plan options available. Restrictions apply. See full terms on Mint Mobile website.

Model: 3-Month Plan, 15GB/mo.

- 26.0MP APS-C format Exmor R back-illuminated CMOS sensor - BIONZ XR processing power for exceptional image quality - Dedicated AI Processor and Real-time Recognition for accurate subject tracking - 4K/60p 6K oversampled 4:2:2 10-bit recording with Long GOP or All Intra formats - High frame rate 4K 120p recording

- 26.0MP APS-C format Exmor R back-illuminated CMOS sensor - BIONZ XR processing power for exceptional image quality - Dedicated AI Processor and Real-time Recognition for accurate subject tracking - 4K/60p 6K oversampled 4:2:2 10-bit recording with Long GOP or All Intra formats - High frame rate 4K 120p recording

Style: Camera

- The information below is per-pack only - IN THE BOX: HDMI cable (A Male to A Male) for connecting 2 HDMI-enabled devices; 3 feet long in Black (3-pack) - DEVICE COMPATIBLE: Connects Blu-ray players, Fire TV, Apple TV, PS4, PS3, Xbox One, Xbox 360, and computers to TVs, displays, A/V receivers, and more - SUPPORTS 4K VIDEO: Supports 4K video at 60 Hz, 2160p, 48-bit/px color depth, as well as bandwidth up to 18Gbps, Ethernet, 3D, and Audio Return Channel (ARC) - EASY CONNECTION: Share an Internet connection among multiple devices (no need for a separate Ethernet cable) - BACKWARDS COMPATIBLE: Works with earlier versions to allow for use with a wide range of HDMI-enabled devices - NOTE: This cable supports up to 4K@60Hz, so if a connected device's output is higher than that standard, the cable won't work properly

Size: 3 Feet (Pack of 2)    Style: 3-Pack