Can be painted directly over rust, a rust-preventive paint for iron parts
Uses:
Topcoat and rust preventative for both indoor and outdoor iron and steel products
Features:
This is a special rust inhibitor for iron parts that can be applied directly over rust.
Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc.
Uses silicone acrylic resin for excellent weather resistance
No need for rust removal or rust-preventive paint, significantly reducing painting labor
Notes:
Contains flammable and ignitable petroleum products.
Do not use for anything other than the intended purpose.
Do not apply near open flames.
Do not use if you are in poor health or sensitive to allergens or chemicals.
When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary.
Avoid contact with skin, as it may cause irritation.
Also, be careful not to inhale vapors or get it in your eyes.
*Contains organic solvents, so ensure that there is good ventilation while painting and drying.
Paint will not come off clothes once it gets on them.
Work in clothing that you won’t mind getting soiled.
Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day.
Finish painting by 3 PM during seasons when condensation occurs.
If thinned too much or applied too thinly, sufficient effects may not be obtained.
*Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions.
May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials.
If painted over before it is dry, the paint film may wrinkle and lift.
The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying.
Dispose of the container after using up the paint.
If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste.
If transferring paint, use a non-soluble container like metal.
Handle the container with care to prevent content spillage if dropped.
*Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product.
Store out of reach of young children and ensure they do not ingest, eat, or tamper with it.
Close the lid of the remaining paint tightly and store it, using it up as soon as possible.
(1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner).
(2) Cover areas that should not be painted with masking tape or a masker in advance.
(3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%).
(4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily).
For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat.
(5) Remove the masking tape once the paint is no longer tacky to the touch.
Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner).
*In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible.
If swallowed by accident, seek medical attention as soon as possible.
*In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary.
*In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.
Brand | アサヒペン(Asahipen) |
---|---|
Model Number | 4970925527431 |
Product Dimensions | 8 x 8 x 7 cm; 300 g |
Color | matte white |
Name List for Name Plates | Paint |
Power Source | hand_powered |
Laser Class | Rust Resistant |
Included Components | No |
Item Weight | 300 g |