30399 products in All Categories

- SMI 2263XT Series Controller, 2280 M.2 PCIe Gen3 x4, NVMe 1.3 - Built-in End-to-End Data Path Protection, SmartECC Technology, and Thermal Throttling Technology - Supports LDPC (Low-Density Parity Check) to correct errors during reading and ensure data integrity, and extends the life of NAND flash with NANDXtend ECC technology - SEQ performance read max 1,700 MB/s, write max 1,100 MB/s. 4K alignment random write: max 260K IOPs - 5-year warranty. OS Compatibility: Windows 7*/8.0*/8.1/10/11

Size: 512GB

Optane Memory 16GB PCIe M 2

- Applications: Drilling holes in leather, rubber, vinyl, paper, and gypsum board - Size: 5.0mm - Shaft diameter: 6.35 mm hex shank - Compatible models: Charging drills, impact drivers - Material: SK-4

Size: 05mm

- Formulated with a special anti-rust agent, it can be applied directly over rust without dropping rust - Strong adhesion force, can be applied to galvalium steel plates, aluminum, stainless steel, etc - Silicone acrylic resin for weather resistance - Since there is no rust remover or rust paint required, you can greatly reduce the trouble of painting - Applications: (Indoor and Outdoor Classification: For indoor and outdoor use) doors, fences, shutters, pipes, mechanical tools, agricultural equipment and other indoor iron and iron products, galvanium steel sheet siding, aluminum building materials, stainless steel products

Color: ツヤ消しアイボリー    Size: 300ML

Please do not use for purposes other than the indicated purpose. Do not apply in an open flame. Do not use this product when you have poor health or those with allergies or chemicals. During handling, please use a mask, protective glasses, or gloves (where paint does not permeate the product, such as poly gloves, etc.) if necessary. Do not touch skin as this may cause irritation. In addition, please be careful not to inhale steam or get into your eyes. Contains organic solvents, so please ventilate well during painting and drying. The paint will not come off when it gets on your clothing. Work with clothing that does not affect even if the paint gets applied. Avoid painting on rainy days or humid days. Apply on days with good weather. During the time of condensation, please finish coating before 3 pm. If you apply too thin or too thin it may not achieve sufficient effects. Paint area and drying time may vary depending on differences in color, material, application method, and weather conditions. May not adhere to special siding that uses fluorine resin, silicone resin, photocatalysts, or caulking materials, or sealants. If you apply the paint layer under insufficient dry conditions, the coating film may float up in a wrinkle. After drying, it may dissolve if you wipe the paint film with a paint thinner or solvent based cleaner. Please discard the container after it runs out of paint. When disposing of paint without any circumstances, cure with Asahipen water-based and oil-based paint solidifier, or spread it in newspapers and dry completely before dispose of it as general waste. Please do not leave the wasps that have adhered to the paint and put them in water until disposal. When transferring paint, please use a container that does not dissolve such as metal. If the container is dropped, the contents may leak, so please handle with care.

Color: 白    Size: 300ml

- Capacity: 10.1 fl oz (300 ml) - Color: Blue

Color: 青    Size: 300ml

No description available.

Size: L

Features: This sealant is suitable for healthy housing. It can be painted over. It has excellent adhesion, resilience, water resistance, heat resistance, cold resistance, weather resistance, and low-temperature workability. Applications: For repairing cracks in interior and exterior joints in general buildings. For repairing cracks in mortar and concrete. For sealing gaps between equipment and walls in bathrooms, restrooms, and washing facilities. For sealing joints in PVC-coated steel sheets and colored iron plates. *Not for use on PVC water supply pipes.

Color: gray   

- The Amazon points awarded for this item will be the sum of the points for the individual items.- - Product (Left): Volume: 8.9 fl oz (264 ml). - Product (Left): Achieves a dyed-like finish by simply spraying on metal, leather, fabric, wood, and plastic. - Product (Left): Utilizes nanotechnology to create a dye-like paint where nano-sized particles penetrate and adhere to the interior of the material. - Product (Left): Ideal for changing the color of leather goods or restoring faded items. - Product (Right): Can be applied to leather products and fabrics that have never been painted before. Dries amazingly fast and is easy to use. Produces a dye-like finish. - Product (Right): Applicable Materials - Please refer to the Somay-Q’s material compatibility chart (English language not guaranteed).

LOCTITE Urethane Foam, Green Foam, 12.6 oz (340 g), Filler for All Gaps for Window Frames, Pipes, and Other Residential Construction Multipurpose urethane foam for indoor and outdoor residential soundproofing, insulating, gap-filling and mouseproofing can be used on wide, flat and irregular surfaces. It reacts to moisture and cures quickly without losing volume after curing, making it easy to sand, cut and paint as needed. It can also be attached to almost any building material, and can be used to fill cavities and cracks in penetrating areas such as walls and ceilings, pipes and ducts. In addition, by sealing gaps between windows, doors, plumbing and electrical appliances, it not only improves insulation but also sound insulation. Product Benefits * Use Anywhere * Can be filled and filled in any gap * Can also be used as an adhesive for insulation boards, pipe insulation. * Can be quickly cured and polished, cut and painted once cured * High moisture and mildew resistance * Round tube included How to use 1. Completely remove dust and oil from the filling area. 2. Be sure to cure the surroundings of the area with a masking tape or sheet. 3. Lightly moisten the area with water using a spray or similar spray. 4. Firmly attach the tube to the can, shake it up and down for about 20 times before use. 5. Turn the can upside down and pull the trigger to discharge the liquid. 6. When installing door frames and window frames, please be sure to use a support rod to prevent the frame from deforming due to the pressure of the foam. 7. After 1-2 hours, cut off unwanted parts with a utility knife, then apply paint or putty on urethane foam if needed.

Size: 297 g (mini) single item

- [Drying/Recoat Time] [68°F (20°C)] Drying Time: About 1 hour, Recoat Time: About 2 hours or more [Winter] Drying Time: About 2 hours, Recoat Time: About 4 hours or more [Coverage Area (1 coat)] 2L: Square Meter: About 10-25 m², Tatami Coverage: About 12 sheets 4L: Square Meter: About 20-50 m², Tatami Coverage: About 24 sheets 7L: Square Meter: About 35-85 m², Tatami Coverage: About 42 sheets 14L: Square Meter: About 70-170 m², Tatami Coverage: About 84 sheets - 【特徴】 ■[Improved adhesion! The positive ions of the cation and the base, and the negative ions of the old paint film are electrically matched to increase adhesion ■[Adhesion & durability are improved! Since it is a reaction-hardening type with silicone, it further improves adhesion and durability ■[Easy-to-handle paint] It is water-based, so it has a mild odor and is easy to handle - 【Applications】 ■[Primer for building materials] Blocks / Mortar / Concrete / Siding (excluding ceramic type) etc. ■[Various primers] Indoor vinyl wallpaper / Gypsum board / Calcium silicate board ■[For improved adhesion] When repainting exterior walls / old paint film 【Not to be used for】 ■Do not use for purposes other than those indicated ■Cannot be used on smooth surfaces or specially treated materials such as silicone resin, fluorine resin, tile, ceramic, natural stone, or specially waterproofed materials ■Always in contact with water: Pool / Bathtub / Bathroom floor / Pond - 【注意事項】 ■For cement tiles, slate tiles, etc., please use our "oil-based sealer" When using, please dispense a small amount into a roller tray (metal containers are not allowed as they rust) ■Please do not dilute this product ■ Do not mix. Absolutely do not mix with other paints Also, avoid using the same brushes, rollers, or other tools with other paints as it may cause the paint to solidify ■ The color changes when it dries It is a milky white liquid, but it becomes almost transparent when dry ■ Strictly prohibit moisture until dry. Ensure that the bathroom, toilet, and washroom are not exposed to water or steam for at least one day after painting ■ About Drying Time: The drying time and the area to be painted may vary slightly depending on weather conditions, the material being painted, the shape, and the painting method - 【Cleaning tools】 Water (do not dilute it), use as is )

Size: 7 l

- [Drying/Recoat Time] [68°F (20°C)] Drying Time: About 1 hour, Recoat Time: About 2 hours or more [Winter] Drying Time: About 2 hours, Recoat Time: About 4 hours or more [Coverage Area (1 coat)] 2L: Square Meter: About 10-25 m², Tatami Coverage: About 12 sheets 4L: Square Meter: About 20-50 m², Tatami Coverage: About 24 sheets 7L: Square Meter: About 35-85 m², Tatami Coverage: About 42 sheets 14L: Square Meter: About 70-170 m², Tatami Coverage: About 84 sheets - 【特徴】 ■[Enhanced adhesion! The positive ions of the cation and the base, and the negative ions of the old paint film are electrically attracted to each other, increasing adhesion ■[Adhesion & durability are improved! Since it is a reaction-hardening type with silicone added, it further improves adhesion and durability ■[Easy-to-handle paint] Since it is water-based, it has a weak odor and is easy to handle - 【Applications】 ■[Primer for building materials] Blocks / Mortar / Concrete / Siding (excluding ceramic type) ■[Various primers] Interior vinyl wallpaper / Gypsum board / Calcium silicate board ■[Improves adhesion] When repainting exterior walls / Old paint film 【Not to be used for】 ■Do not use for purposes other than those indicated Cannot be used on smooth surfaces or specially treated materials such as silicone resin, fluororesin, tiles, ceramics, natural stone, or specially waterproofed materials ■ Areas constantly exposed to water: Pool / Bathtub / Bathroom floor / Pond - 【注意事項】 ■For cement tiles, slate tiles, etc., please use our "oil-based sealer" When using, please pour a small amount into a roller tray (metal containers are not allowed as they can rust) ■Please do not dilute this product ■ Do not mix. Absolutely do not mix with other paints Also, avoid using the same brushes, rollers, or other tools with other paints as it may cause the paint to solidify ■The color changes when it dries It is a milky white liquid, but it becomes almost transparent when dry ■ Strictly avoid moisture until dry: Ensure that bathrooms, toilets, and washrooms are not exposed to water or steam for at least one day after painting ■ About drying time: The drying time and the area to be painted may vary slightly depending on weather conditions, the material being painted, the shape, and the painting method - 【Cleaning tools】 Water (do not dilute it), use as is )

Size: 4L