39807 products in All Categories

PRODUCT DESCRIPTION Please note that the item different from the picture will be receiving fake products. It is intended for use as a base for wall siding, so it is only about the thickness of copy paper. Do not use it instead of blue sheets. The surface that says Beauty Ace should be placed on the outside of the room. LEGAL DISCLAIMER We will ship the same product with different printed surfaces that are JIS standard

- With the incorporation of a special rust inhibitor, it can be applied directly over rust without removing it - Strong adhesion, can be applied to materials such as Galvalume steel sheets, aluminum, and stainless steel - Utilizes silicone acrylic resin for excellent weather resistance - No need for rust remover or rust-stopping paint, significantly reducing the time required for painting - Applications: (Indoor/Outdoor classification: For both indoor and outdoor use) Doors, fences, shutters, pipes, machinery, agricultural equipment, and other indoor and outdoor iron parts and iron products, galvalume steel plate sidings, corrugated metal, aluminum building materials, stainless steel products - (Standard) Number of coats: 1 coat - Paint Coverage Area: 0.2 gallons (0.7 L) / 64.6 - 88.3 square feet (6 - 8 square meters or 3.6 - 4.5 tatami mats) - Drying time: Summer: 1.5 - 2 hours, Winter: 5 - 6 hours

Color: matte grey    Size: 0.7L

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: ツヤ消しアイボリー    Size: 0.7L

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: ツヤ消し白    Size: 0.7L

- Weight: 605g - Body: Die-cast aluminum - Compatible caulking agent: 11.2 fl oz (330 ml) - Total length x height x shaft diameter (inches): 14.6 x 8.7 x 2.3 x 2.3 inches (370 x 220 - Grip Trigger: Engineering plastic

- This product is not covered by any warranty. Please note:

Makita A-56649 PVC Cutting and Chamfered Diamond Wheel 100 Product Number: A-56649.

Color: Silver    Size: 外径100mm

No description available.

Color: Cute Donut Pink   

- Your smartphone's sound is transformed Spread high quality sound and deep bass anytime, anywhere - ・Equipped with X Balanced Speaker Unit - ・Equipped with Sony's proprietary algorithm mono mode that spreads sound even when placed vertically - Equipped with Extra Bass mode that produces deep bass - Made of fabric material, dustproof, waterproof (IP67), and rust-proof

Color: blue    Style: SRS-XB23    Pattern: Single Item

- [Dye Q Series] The nano-unit particles adhere to the surface of the material, making it look as if it is dyed Its adhesive strength is such that, even when pulled or twisted, it does not crack or peel off, allowing you to change the image without altering the texture of the material Great for changing the color of leather products, repairing old and faded items... Quick drying and good workability, and can be used with a wide range of materials and applications - Features: Achieves a finished look as if leather, fabric, wood, plastic, and metal have been dyed Easy to clean with just spray Utilizing nanotechnology, this dye-type paint features nano-sized particles that penetrate and adhere tightly to the material's interior.' When using, ensure good ventilation and use protective equipment to avoid inhaling mist or gas - Applicable materials: Please see the material adaptation chart for Somé Q - 【Simple Description】 It features a finish that looks like dyeing just by spraying it on metal, leather, fabric, wood, and plastic Utilizing nanotechnology, this dye-type paint features nano-sized particles that penetrate and adhere tightly to the material's interior.' Can also be used to change the color of leather and repair faded items Fast drying for good workability, and can be used with a wide range of materials and applications - 【注意事項】 ・Shake well up and down for about 1 minute before use, and occasionally shake well during use Please do not apply thick coatings When using, perform a test application on an inconspicuous area to check for any unusual effects on the material or adhesion ・Do not use when the temperature is below 5°C or humidity is above 70% Spray thickly at once, and ensure not to keep more than 15 cm away from the painted surface ・Materials that are weak to solvents are not suitable When handling, please read the precautions and other notes listed on the product carefully before use

Color: モスグリーン    Pattern Name: 単品

- 【Easy to Assemble】This kitchen storage rack requires self-assembly, and you can easily assemble it by referring to the included assembly instructions The head part can be assembled in two different ways Can be installed according to your preference or usage habits - Abundant Storage Space: With 3 large shelves for multi-tiered storage in your kitchen, it is convenient for storing appliances such as microwave ovens and rice cookers At a height that is neither too high nor too low, it can be used comfortably without strain - 【High Quality Construction】Made with melamine finish, it is resistant to light scratches, has good water resistance, and can be easily cleaned and kept clean by simply wiping with a wet cloth Well-ventilated and heat-resistant, it is likely to be quite popular as a microwave stand - (Organize Organization) With ample storage capacity, you won't have to worry about organizing your kitchen Easy to use and efficient with three large tabletops, it also includes a dedicated area for cooking utensils, hooks, and towel hangers Not only for microwaves, but also for bolts and miscellaneous items, dishes, rice cookers, etc., it provides neat storage - 【One-year warranty included】Product Size: Width 31.5 x Depth 15.7 x Height 62.9 inches (80 x 40 x 160 cm); Material: Particle board (melamine coated), steel; Product Weight: Approx. 30.5 lbs (13.85 kg) High load-bearing design for long-lasting use: 9 kg, 9 kg, 45 kg, 14 kg, 14 kg ※This product requires customer assembly

Color: Braun    Size: 80 x 40 x 160 cm

- ①【SUNLU PLA 3D Printer Filament】PLA material is the perfect choice for 3D printing enthusiasts! SUNLU PLA filament is reliable, versatile, and easy to use. No clogs, bubbles, or tangles, its excellent layer adhesion ensures high-quality prints every time. Ideal for beginners and experienced users. - ②【Neatly Wound 3D Filament Spool】SUNLU's self-developed neat winding device ensures that the filament is easy to use, with a 100% neat rate that reduces the risk of tangles and jams, and provides a smoother and more efficient 3D printing experience. - ③【PLA Filament 1.75 mm】SUNLU 3D printer filament dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers. - ④【Filament Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers. - ⑤【PLA Recommend Settings】To achieve the best printing results with SUNLU PLA filament, we recommend printing at a nozzle temperature of 200-230°C, a bed temperature of 50-65°C, and a printing speed of 50-100mm/s. - ⑥【SUNLU Main 3D Products】SUNLU offers a wide range of high-quality 3D printing products, including 3D printer filament, filament dryer, FDM 3D printer, 3D pen, 3D pen filament, 3D printer resin, LCD 3D printer, resin curing box, and other accessories, providing you with everything you need for a successful 3D printing experience.