41057 products in All Categories

- 【Durable and Strong】 Drawer runners are made of 1mm high-quality Q235 cold-rolled steel, width: 45mm, hold 100 pounds, 40 pounds more than regular runners. - 【Double anti-rust】Surface electrophoresis treatment. The electrophoretic layer prevents air from directly contacting the rail steel plate, proving its durability in over 50,000 opening and closing tests. - 【Side Mount Drawer Runners】Mounting screws included. Length: 250mm(10 inch). The pull-out length of the drawer slides is equal to the closed length, you can choose the size of the rails according to the depth of the drawer. The length of the slide should be ≤ the length of the drawer. Installation clearance: 12.7mm~13mm(Each). - 【Multiple Sizes】The drawer runners are available in 200 250 300 350 400 450 500 550 600mm, runners for wardrobe drawers, kitchen cabinet drawers etc. - 【Ball Bearing Drawer slides & Detachable 】 Solid steel ball to ensure smooth opening and closing of the slides.The inner rail can be detached by pressing the buckle for easy installation.The rear end of the slide rail is equipped with a rubber mute pad, and the noise is as low as 35 decibels.

Colour Name: Black - 5 Pairs    Size Name: 10 Inch (250mm)

- Mobil 1 Extended Performance full-synthetic motor oil 5W-30 helps protect critical engine parts for up to 20,000 miles between oil changes,* controlling oxidation to prevent oil breakdown and maintaining excellent viscosity. - Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power - Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy - Helps extend engine life by working to prevent damaging deposits and sludge buildup - Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)

Size: 5 Quart    Style: Extended Performance    Configuration: 5W-30

- 【Durable and Strong】 Drawer runners are made of 1mm high-quality Q235 cold-rolled steel, width: 45mm, hold 100 pounds, 40 pounds more than regular runners. - 【Double anti-rust】Surface electrophoresis treatment. The electrophoretic layer prevents air from directly contacting the rail steel plate, proving its durability in over 50,000 opening and closing tests. - 【Side Mount Drawer Runners】Mounting screws included. Length: 450mm(18 inch). The pull-out length of the drawer slides is equal to the closed length, you can choose the size of the rails according to the depth of the drawer. The length of the slide should be ≤ the length of the drawer. Installation clearance: 12.7mm~13mm(Each). - 【Multiple Sizes】The drawer runners are available in 200 250 300 350 400 450 500 550 600mm, runners for wardrobe drawers, kitchen cabinet drawers etc. - 【Ball Bearing Drawer slides & Detachable 】 Solid steel ball to ensure smooth opening and closing of the slides.The inner rail can be detached by pressing the buckle for easy installation.The rear end of the slide rail is equipped with a rubber mute pad, and the noise is as low as 35 decibels.

Model: Black    Size Name: 18inch(450mm)

- Made from 2.5 mm thick galvanised steel - Durable and corrosion resistance - Corner rib reinforcement enhances load-carrying capability - The bracket has 23 fixing holes of various shapes and sizes - Can be used with any combination of timber, steel and masonry surfaces

Size Name: 60 x 60 x 40 mm

- 【High Precision】 All metal cabinet hinge jig made of high quality aluminum alloy，The bottom surface is very flat， Is more durable and accurate than plastic jigs. The all metal concealed hinge jig bulit-in double bearings ,the lateral shaking is reduced, and the drilling is more stable and accurate.provides continuous hinge hole drilling and much easier， making drilling more accurate. - 【Easy and Fast】cabinet hardware jig provides quick cabinet hinge hole depth setting，Move the hole puncher to the mark and drilling position of the board, lock the quick clip，it easy to use and greatly improves the efficiency and accuracy of installing cabinet hinges. You can easily clamp and fix the concealed hinge jig, quickly drill holes and install hidden cabinet door hinges. - 【Widely application】The 35MM hinge opener is suitable for 12-25mm wood, 35mm hole to edge distance of 5mm, comes with 35mm hole saw and 2mm drill bit, can be used with any electric drill, 35MM hinge positioning opener is suitable for cabinet/kitchen/closet/cabinet door hinge punching and positioning，which is suitable for most common hinges. - 【Installation steps】The kitchen hinge jig positioning hole opener installation steps 1. Adjust the drilling depth of the limit ring, normally 12-13MM. 2. Adjust the size to adapt to the thickness of the clamped board. 3. Quickly clamp the locking plate according to the drill mark. 4. Drill 35mm and left and right 2mm screw holes 5. Installation Hinge - 【Packing list】：1 *Hinge drilling locator body, 1 *35MM drill bit, 1* 2mm Drill bit,2 *small wrenches, 1 *hexagonal tool, 1 screw, 1 limit ring . Concealed cabinet hinge jig wood hole puncher locator help you drill accurate and fast as drill press.And saves you time and effort.

Number of Items: 1

- 【Durable and Strong】 Drawer runners are made of 1mm high-quality Q235 cold-rolled steel, width: 45mm, hold 100 pounds, 40 pounds more than regular runners, proving its durability in over 50,000 opening and closing tests. - 【Double anti-rust】The surface of the drawer slide rail is galvanized, which isolates the direct contact between water and air, prevents the slide rail from oxidizing and rusting, and improves corrosion resistance. - 【Side Mount Drawer Runners】Mounting screws included. Length: 350mm(14 inch). The pull-out length of the drawer slides is equal to the closed length, you can choose the size of the rails according to the depth of the drawer. The length of the slide should be ≤ the length of the drawer. Installation clearance: 12.7mm~13mm(Each). - 【Multiple Sizes】The drawer runners are available in 200 250 300 350 400 450 500 550 600mm, runners for wardrobe drawers, kitchen cabinet drawers etc. - 【Ball Bearing Drawer slides & Detachable 】 Solid steel ball to ensure smooth opening and closing of the slides.The inner rail can be detached by pressing the buckle for easy installation.The rear end of the slide rail is equipped with a rubber mute pad, and the noise is as low as 35 decibels.

Model: Silver    Size Name: 14inch(350mm)

- 【Stainless Steel Drawer Runners】Made of 1mm high-density high strength stainless steel ,stainless steel drawer runners anti-rust ability is 2 times higher than ordinary slide rails, load capacity 45kg. - 【Side Mount Drawer Runner】Quantity: 1 pair, mounting screws included.Length: 350mm(14 inch).You can choose the size of the rails according to the depth of the drawer. *The length of the slide should be ≤ the length of the drawer. Installation clearance:12.7mm~13mm(Each). Easy to install. - 【Detachable & smooth】There is a plastic buckle on the back of the slide rail, and the drawer can be easily taken out by pressing it, easy to install. Rubber cushion cushion, avoid pushing and pulling collision during use. Double rows of solid steel balls make the drawer open smoother and quieter. - 【Long Service Life & Full Extension】Passed more than 50,000 opening and closing tests, demonstrating their exceptional durability.3-Fold full extension Drawer runners, so that the drawer can be fully drawn out, which is convenient for storing items. - 【Multiple Sizes ball bearing runners】Stainless steel drawer runners are available in 250 300 350 400 450 500 550 600mm. If you have any problems, please be the first contact us.

Model: Edelstahl (rostfrei)    Size Name: 14inch(350mm)

No description available.

Colour Name: 200 Coyote Coyote Coyote    Size Name: 49.5 EU

- 【Heavy Duty T-Hinges】The T-shaped design gives these hinges a stronger load capacity, providing your door with a maximum rotation angle of up to 270 degrees, allowing it to be opened and closed freely. This T-hinges is a mechanical bearing that connects two solid objects (door and door frame) - 【Sturdy Material】This T-shaped hinge is made of stable iron with galvanized surface, which is sturdy, durable, rust-proof and also suitable for outdoor use. The black surface looks more neat and beautiful, effectively reduces surface wear and tear, and is durable - 【Dimensional Data】You will get 6 black metal T-shaped hinges and 36 black screws. The length of the T-shaped shed hinge is 12.3cm/4.3 inches, and the width is 6.7cm/2.63 inches; there are 6 holes in total, which is a suitable size for easy use and storage - 【Easy to Install】Our T strap hinges come with matching screws to meet your requirements. These door accessories are surface fixed, so they are easy to install and can be done by anyone, and can be installed in minutes - 【Wide Application】T-hinge provides extra support for the door, making the door hinge usable for a variety of light to medium-duty door types. Ideal for doors, sheds, windows, gates, barns, fences, wooden boxes, etc. It can be used for both indoor and outdoor installations

Colour Name: 4 Inch/6 Pack

- 【Durable and Strong】 Drawer runners are made of 1mm high-quality Q235 cold-rolled steel, width: 45mm, hold 100 pounds, 40 pounds more than regular runners, 5 pairs drawer runners. - 【Double anti-rust】The surface of the drawer slide rail is galvanized, which isolates the direct contact between water and air, prevents the slide rail from oxidizing and rusting, and improves corrosion resistance.Passed more than 50,000 opening and closing tests, ensuring exceptional durability. - 【Side Mount Drawer Runners】Mouting screws included. Length: 350mm(14 inch). The pull-out length of the drawer slides is equal to the closed length, you can choose the size of the rails according to the depth of the drawer. The length of the slide should be ≤ the length of the drawer. Installation clearance: 12.7mm~13mm(Each). - 【Multiple Sizes】The drawer runners are available in 200 250 300 350 400 450 500 550 600mm, runners for wardrobe drawers, kitchen cabinet drawers etc. - 【Ball Bearing Drawer slides & Detachable 】 Solid steel ball to ensure smooth opening and closing of the slides.The inner rail can be detached by pressing the buckle for easy installation.The rear end of the slide rail is equipped with a rubber mute pad, and the noise is as low as 35 decibels.

Colour Name: Silver - 5 Pairs    Size Name: 14inch(350mm)

No description available.

Colour Name: 200 Coyote Coyote Coyote    Size Name: 11.5 UK

No description available.

Size Name: 9.5 UK    Colour Name: Anthracite Castlerock Black