38074 products in All Categories

- Contents: 2.8 fl oz (1/12 L) - Color: Red - Drying time: 1.5 - 2 hours in summer, 5 - 6 hours in winter - Standard coating area (1 coat): 7.5 - 9.7 sqft (0.7 - 0.9 sqm or 0.4 - 0.5 tatami mats)

Color: red    Size: １／１２Ｌ

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: ツヤ消しこげ茶    Size: 1/12L

The angle can be adjusted to any preference. Can be fixed at a set angle with the set screw

Size: 15cm

The angle can be adjusted to any preference. Can be fixed at a set angle with the set screw

Size: 25cm

Asahipen Oil-based Heavy Duty Paint for Iron Parts, 101.4 fl oz (3 L), Gray, For Iron, Metal, Rust Resistant, Non-Hazardous, Made in Japan

Color: グレー    Size: ３Ｌ

- Contents: 2.8 fl oz (1/12 L) - Color: Chocolate - Drying time: 1.5 - 2 hours in summer, 5 - 6 hours in winter - Standard coating area (1 coat): 7.5 - 9.7 sqft (0.7 - 0.9 sqm or 0.4 - 0.5 tatami mats)

Color: chocolate color    Size: １／１２Ｌ

- With the incorporation of a special rust inhibitor, it can be applied directly over rust without removing it - Strong adhesion, can be applied to materials such as Galvalume steel sheets, aluminum, and stainless steel - Utilizes silicone acrylic resin for excellent weather resistance - No need for rust remover or rust-stopping paint, significantly reducing the time required for painting - Uses: (Indoor/Outdoor classification: For both indoor and outdoor use) Doors, fences, shutters, pipes, machinery, agricultural equipment, and other indoor and outdoor iron parts and iron products, galvalume steel plate sidings, corrugated metal, aluminum building materials, stainless steel products - (Standard) Number of coats: 1 coat - Specifications: Coating Area: 0.2 gallons (0.7 L) / 64.6 - 86.1 sq ft (6 - 8 m{^>2 - Drying time: Summer: 1.5 - 2 hours, Winter: 5 - 6 hours

Color: blue, (sky)    Size: 0.7L

- Weight: 605g - Body: Die-cast aluminum - Compatible caulking agent: 11.2 fl oz (330 ml) - Total length x height x shaft diameter (inches): 14.6 x 8.7 x 2.3 x 2.3 inches (370 x 220 - Grip Trigger: Engineering plastic

- Outer Diameter: 3.0 inches (75 mm), Screw Diameter: M10 x P1.5 - Maximum Rotational Speed: 12,000 per minute - Applicable models: Disc grinder - Wire: Brass plated on hard steel wire

Makita A-56649 PVC Cutting and Chamfered Diamond Wheel 100 Product Number: A-56649.

Color: Silver    Size: 外径100mm

No description available.

- 【Product Information】Material: Cotton (Eco-friendly Organic Cotton) Specification: Box Type (with anti-slip rubber around the entire perimeter, suitable for mattresses/futons up to 25 cm thick) Country of Origin: China ▲Please Note: Our genuine products are only sold by "Amazon.co.jp" and "Kumori Store" - 【Gentle on the skin cotton fabric】The cotton material offers a soft and gentle touch Even those with sensitive skin can comfortably enjoy a pleasant experience It will get softer after washing - 【Good breathability and water absorption】The cotton fibers have a hollow center with a path for air to flow through, which gives them good breathability Compared to other materials, it also has the benefit of quickly absorbing moisture such as sweat and dispersing it outward It does not get stuffy even during the summer months where you sweat a lot, and keeps you dry and comfortable - 【High Durability】Compared to other natural fibers, cotton is strong and less prone to damage even with daily washing, making it an ideal material for periods when you sweat and need frequent washing It has excellent heat resistance and can be ironed without any problems, so you can easily deal with any creases - Suitable for all seasons: Water resistant and durable, so you can use it hygienically for a long time With high moisture retention and reduced static electricity, it provides a comfortable sleeping experience in any season

Color: green    Size: シングル・100X200cm