41083 products in All Categories

- REDUCER FITTING: NPT Brass Pipe Fitting Adapter, for connecting pipes or fittings of different sizes, and can be used in wet environments. The NPT (National (American) Pipe Thread) size is the American standard 60 degree taper pipe thread, which does not represent the internal diameter or outer diameter of the brass joint. The specific ID and OD diameter specifications can be found in the product pictures. Please measure and select the appropriate size before purchasing. - THREADS: 1/8" NPT Male x 1/8" NPT Female threads, not easy to slip, the NPT threads create a tighter seal than straight threads, and smoother threads for easier and quicker installation. - MATERIAL: Made of premium solid brass, high strength and hardness, wear and corrosion resistance, more durable than iron / iron galvanized pipe fittings. - USE: Work temperatures range from -53°C to 121°C (-65°F to 250°F), can be used with garden sprinkler, grease, fuels, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections. - STANDARD & NOTE: High quality assurance, can not used for potable water due to the fittings contain lead. For better sealing, we suggest that all fittings must be used with sealing tape.

Color: 2P 1/8"Male x 1/8"Female

- NPT SPEC/SIZE CHECK: NPT1/2-14 Male x NPT3/4-14 Female Brass Pipe Fitting Adapter, can be used in wet environments. The NPT (National (American) Pipe Thread) size is the American standard 60 degree taper pipe thread, is NOT equal to joint diameter size measured by common tools like ruler, tape measure or vernier caliper. Please find the correct size comparison information on the detailed page before purchasing! - THREADS: 1/2 NPT Male (OD approx 0.81" - 0.84", 14 Threads Per Inch) x 3/4 NPT Female threads (ID approx 0.96" - 1", 14 Threads Per Inch), not easy to slip, the NPT threads create a tighter seal than straight threads, and smoother threads for easier and quicker installation. - MATERIAL: Made of premium solid brass, high strength and hardness, wear and corrosion resistance, more durable than iron / iron galvanized pipe fittings. - USE: Work temperatures range from -53°C to 121°C (-65°F to 250°F), can be used with garden sprinkler, grease, fuels, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections. NPT threads are tapered, and it is recommended to use them together with Pipe Thread Sealant or Teflon Plumbers Tape for sealing. Not recommended to use gaskets. - STANDARD & NOTE: High quality assurance, can not used for potable water due to the fittings contain lead. For better sealing, we suggest that all fittings must be used with sealing tape.

Color: 2P 1/2"Male x 3/4"Female

- JOHN GUEST CHECK VALVE: This push-to-connect check valve allows you to prevent the reverse flow of water quickly and easily; suitable for reverse osmosis systems, ice makers, coffee and beverage dispensing equipment, hydroponics, and aquarium/aquatics - COMPATIBILITY: The John Guest imperial single check valve is compatible with plastic or soft copper tubing - DESIGN: This check valve is equipped with EPDM O-rings that utilize John Guest's push-fit technology to make easy, reliable, and leak-free connections - DURABLE: This valve is made with durable white polypropylene that provides excellent protection against chemicals - SAFETY: These plastic check valves are manufactured with FDA-compliant material and are NSF 61 and 51 certified

Size: 3/8 in.

- NPT SPEC/SIZE CHECK: NPT1/8-27 Male x NPT1/4-18 Female Brass Pipe Fitting Adapter, can be used in wet environments. The NPT (National (American) Pipe Thread) size is the American standard 60 degree taper pipe thread, is NOT equal to joint diameter size measured by common tools like ruler, tape measure or vernier caliper. Please find the correct size comparison information on the detailed page before purchasing! - THREADS: 1/8 NPT Male Thread (OD approx 0.39" - 0.4", 27 Threads Per Inch) x 1/4 NPT Female Thread (ID approx 0.47" - 0.5", 18 Threads Per Inch), not easy to slip, the NPT threads create a tighter seal than straight threads, and smoother threads for easier and quicker installation. - MATERIAL: Made of premium solid brass, high strength and hardness, wear and corrosion resistance, more durable than iron / iron galvanized pipe fittings. - USE: Work temperatures range from -53°C to 121°C (-65°F to 250°F), can be used with garden sprinkler, grease, fuels, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections. NPT threads are tapered, and it is recommended to use them together with Pipe Thread Sealant or Teflon Plumbers Tape for sealing. Not recommended to use gaskets. - STANDARD & NOTE: High quality assurance, can not used for potable water due to the fittings contain lead. For better sealing, we suggest that all fittings must be used with sealing tape.

Color: 1/8" M NPT Thread x 1/4" F NPT Thread

- 【Multi-purpose】The multi-functional balloon pump electric can blow almost all balloons, normal latex balloons, foil balloon, long magic balloon, inflatable pool, swimming ring, air mattresses bed, inflatable boat. Also can be used for vacuuming, such as vacuum bags, etc. - 【Specifications】Dual Independent Motor. Type: manual, automatic. Pressure: 2-10 PSI. Input voltage:110-120V, Power: 20-600W. Noise ≤ 85dB. Frequency: 50/60Hz. - 【Widely Used】5 Nozzles Available. The balloon pump can be used at birthday parties, weddings, baby shower, various commercial activities and other holiday balloon decorations, pool party ,water-fun party, which can help you save time and improve efficiency. - 【Attention】NOT Helium, NOT Hydrogen. This electric balloon pump only fills balloons with air, and the balloons will not float. To extend the life of the electric balloon pump, we suggest you pause after 30 minutes of continuous use. - 【Buy with Confidence】: If you are not satisfied with our electric balloon pump, do not hesitate to contact us, we guarantee to give you 100% satisfied service.

Color: Green

- 【Model】2WK025-08;Voltage: AC110V - 【Size】1/4 inch NPT - 【Material】Brass,High Strength, Wear and Corrosion Resistance, Long Service Life - 【Pressure range】0-145Psi【Working temperature range】23-176°F - 【Applicable】Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.)

Size: AC110V/Normally open    Style: 1/4"

- 【Model】2W025-08;Voltage: DC24V - 【Size】1/4 inch NPT - 【Material】brass - 【Pressure range】0-145Psi【Working temperature range】23-176°F - 【Applicable】Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.)

Size: DC24V    Style: 1/4"

- Exclusive hollow shaft design with Rare-Earth magnetic tip features unobstructed pass-through, even on long bolts - Full hollow shaft facilitates work on long bolt applications - Cushion-Grip handle allows for greater torque and comfort and handle dome is color coded for easy identification - Internal flanges provide solid, twist-resistant shaft anchor - Made in USA

- 【Model】 2W-200-20;Voltage: AC110V - 【Size】 3/4 inch NPT - 【Material】brass - 【Pressure range】0-145Psi【Working temperature range】23-176°F - 【Applicable】Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.)

Size: AC110V    Style: 3/4"

- 【Model】2WK025-08;Voltage: DC24V - 【Size】1/4 inch NPT - 【Material】Brass,High Strength, Wear and Corrosion Resistance, Long Service Life - 【Pressure range】0-145Psi【Working temperature range】23-176°F - 【Applicable】Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.)

Size: DC24V/Normally open    Style: 1/4"

- NPT SPEC/SIZE CHECK: NPT1/2-14 Male x NPT3/4-14 Female Brass Pipe Fitting Adapter, can be used in wet environments. The NPT (National (American) Pipe Thread) size is the American standard 60 degree taper pipe thread, is NOT equal to joint diameter size measured by common tools like ruler, tape measure or vernier caliper. Please find the correct size comparison information on the detailed page before purchasing! - THREADS: 1/2 NPT Male (OD approx 0.81" - 0.84", 14 Threads Per Inch) x 3/4 NPT Female threads (ID approx 0.96" - 1", 14 Threads Per Inch), not easy to slip, the NPT threads create a tighter seal than straight threads, and smoother threads for easier and quicker installation. - MATERIAL: Made of premium solid brass, high strength and hardness, wear and corrosion resistance, more durable than iron / iron galvanized pipe fittings. - USE: Work temperatures range from -53°C to 121°C (-65°F to 250°F), can be used with garden sprinkler, grease, fuels, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections. NPT threads are tapered, and it is recommended to use them together with Pipe Thread Sealant or Teflon Plumbers Tape for sealing. Not recommended to use gaskets. - STANDARD & NOTE: High quality assurance, can not used for potable water due to the fittings contain lead. For better sealing, we suggest that all fittings must be used with sealing tape.

Color: 4P 1/2"Male x 3/4"Female

- 【Product Name】Tee Shape Push-to Connect Fittings - 【Material】Plastic and Copper - 【Size】1/4" Tube OD x 1/8" NPT Thread,Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter - 【Maximum Pressure】0~145Psi【Working Temperature】32～140°F - 【Features】√ Freely change pipeline direction after installation √ Easy to insert or pull trachea manually without tools

Size: 1/4"OD x 1/8"FNPT    Number of Items: 10